Image default
Access ControlFeatured

New Non-Fluorinated THUNDERSTORM WNF33A Foam Concentrate from Johnson Controls advances fire protection for flammable liquid storage tanks

Johnson Controls, the global leader for smart, healthy and sustainable buildings, has announced the launch of THUNDERSTORM WNF33A 3%x3% Non-Fluorinated Foam Concentrate, the newest addition to the renowned WILLIAMS FIRE & HAZARD CONTROL firefighting foam portfolio.

Powerful protection

Fuel in-depth fires and sunken roof hazards can occur at flammable liquid storage facilities, oil and gas tank farms, refineries and petrochemical processing operations. Historically, non-fluorinated foams have been challenged to deliver the performance of a traditional alcohol-resistant aqueous film-forming foam (AR-AFFF) for Class B firefighting on these types of hazards. The new THUNDERSTORM WNF33A Foam Concentrate provides excellent fire and vapor suppression for hydrocarbon fuels, such as gasolines and diesel, as well as for polar-solvent fuels, such as alcohols and ketones.

‘We’ve rigorously tested THUNDERSTORM WNF33A Foam Concentrate, and it demonstrates excellent control and extinguishment for large, hydrocarbon tank fires similar to legacy THUNDERSTORM foam products,’ said David Ash, product director of Firefighting Foam Products, Johnson Controls. ‘It’s also highly effective when used to fight flammable liquid spills.’

Proven performance 

During recent 42ft tank fire tests at the Industrial Rescue Instruction Systems Training Center in Beaumont, Texas, THUNDERSTORM WNF33A was evaluated at an application rate of 0.08gpm/ft2, which is half the design rate recommended by UL 162 and NFPA 11 industry standards for hydrocarbon fuel in-depth fires. Control of the tank fire was established in approximately two minutes, comparable to that of legacy THUNDERSTORM foam concentrates on similar 42ft tank tests. Its long-lasting foam blanket also demonstrated strong burnback resistance and post-fire suppression.

THUNDERSTORM WNF33A Foam Concentrate has a viscosity similar to its AR-AFFF predecessor and can be used with most conventional response proportioning and discharge devices. This foam concentrate produces a robust foam blanket at expansion ratios as low as 3:1, so it can be applied with non-aspirating nozzles and deliver significant throw distance. It can also be used in conjunction with dry chemical agents for dual firefighting application.

Backed by the industry leader 

Continuing the renowned, 70-year heritage of THUNDERSTORM foams from the WILLIAMS FIRE & HAZARD CONTROL product portfolio as well as other Johnson Controls fire protection products and solutions, THUNDERSTORM WNF33A Foam Concentrate delivers the firefighting performance needed to respond with confidence to today’s most challenging oil, gas, chemical and industrial fires.

THUNDERSTORM WNF33A Foam Concentrate is a GreenScreen Certified Silver formulation. As a non-fluorinated foam concentrate, it doesn’t have any intentionally added PFAS chemistry, is produced in equipment that has not handled PFAS chemistry and inherently complies with Directives (EU) 2017/1000 on PFOA and 2019/1021 (EU POPs directive).

Click here to learn more about THUNDERSTORM WNF33A Foam Concentrate from Johnson Controls.

*The GreenScreen Certified Logo and word marks are certification marks of Clean Production Action, Inc.

Related posts

Colorado chapter joins NFPA Electrical Inspection Section The National Fire Protection Association (NFPA) has confirmed that the Association for Colorado Inspectors is now an Electrical Inspection Section (EIS) Affiliate Chapter. According to NFPA, the Colorado-based group will support electrical inspection professionals across the state by providing access to training, education, and networking resources. The NFPA’s EIS Affiliate Chapter network includes regional associations that collaborate with the NFPA to support code enforcement and inspection personnel. The Colorado chapter is the fourth to join the programme. NFPA and Colorado inspectors aim to address electrical hazards The chapter aims to support the state’s electrical enforcement community in applying NFPA 70, also known as the National Electrical Code (NEC), and other safety standards. Tim McClintock, NFPA regional electrical specialist, said: “NFPA is pleased to welcome its latest EIS Affiliate Chapter. “Through this relationship, NFPA and the Colorado electrical enforcement community can unite efforts, using our collective voice to help address today’s current and emerging electrical challenges to advance safety in the community.” McClintock said the chapter “actively supports electrical inspection professionals who are charged with understanding the NEC and how its requirements are applied”. Chapter members gain access to specialist NFPA membership Electrical inspectors in Colorado who join the chapter may qualify for membership in the NFPA Electrical Inspection Section. This membership includes participation in the code development process, training on changes to the NEC, access to inspection-focused products and services, and opportunities to attend related events. The NFPA said this initiative is part of a wider effort to engage inspection professionals more closely with the code development and enforcement community. Initiative follows wider NFPA focus on national support The Association for Colorado Inspectors joins three other US groups with EIS Affiliate Chapter status: the Southwest Ohio Electrical Organization, North Carolina Electrical Inspector Association, and the Kentucky Association of Electrical Inspectors. Tom Blevins, president of the Association for Colorado Inspectors, said: “The Colorado electrical inspection community is pleased to be working closely with NFPA to meet today’s electrical safety challenges head on, help expand our impact and position the chapter for the future.” This expansion aligns with NFPA’s recent increase in regional staffing, including the addition of two new electrical specialist roles. NFPA expands US electrical inspection network with Colorado chapter: Summary The National Fire Protection Association has named the Association for Colorado Inspectors as an Electrical Inspection Section Affiliate Chapter. This designation provides Colorado inspectors with access to NFPA resources, including code training, education, and networking. The chapter is intended to help local inspectors apply NFPA 70 and related codes. NFPA regional electrical specialist Tim McClintock said the group will serve the unique needs of Colorado’s inspection community while maintaining their independence. Members of the chapter may be eligible for membership in the NFPA Electrical Inspection Section. Other existing Affiliate Chapters are based in Ohio, North Carolina, and Kentucky. The initiative supports NFPA’s broader effort to engage with regional professionals through specialist staff and new chapters across the United States.

Mthokozisi

REACTON FIRE SUPPRESSION ON AIRPORT SAFETY

Mthokozisi

Investigators yet to locate source of gas leak in Port Richmond row home explosion

Mthokozisi

Leave a Comment